IP-OCTAL-SERIAL - SBS TECHNOLOGIES IP-OCTAL SERIAL 8 Channels of RS-232-D Receiver/Transmitter Simple...
- Part Number:
- IP-OCTAL-SERIAL
- Model Number:
- IP-OCTAL-SERIAL
- Make:
- SBS TECHNOLOGIES
- Lead Time:
- Available
- Qty In Stock:
- Available
SBS TECHNOLOGIES IP-OCTAL SERIAL 8 Channels of RS-232-D Receiver/Transmitter Simple Type: Transmitter
8 Channel Serial Data Interface IP-OctalSerial is part of the IP Module family of modular I/O components capable of providing multiple serial protocols. The standard protocol implemented provides a Data, Clock and Strobe interface with Ready control. The –FCS version is a custom modification. The main modifications include lsb first format, gated clock, and custom strobe timing. In addition to the FCS version other custom interfaces are available. Please see our web page for current protocols offered. If you do not find it there we can redesign the state machines and create a custom interface protocol. That protocol will then be offered as a “standard” special order product. Please contact Dynamic Engineering with your custom application. The IP-OctalSerial-FCS supports both 8 and 32 MHz IP Bus operation. Differential I/O are available on the serial signals.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- Access Width: all addresses are on 16 bit boundaries
- Clocks: Internally generated and externally supplied clocks are supported with source selection and programmable divider.
- ID PROM: Each version of the IP-OctalSerial has a unique ID PROM for identification.
- Interrupts: Programmable interrupts for each channel are supported. Masked interrupts can be used in polled mode by reading the status register. Interrupts are mapped to INTR0n on IP bus.
- IO: 24 independent RS485/RS422 transceivers. 40 MHz max. Programmable termination. Unused bits can be used as a parallel port.
- IP decoding: ID, IO, Mem and INT spaces supported
- Memory: 8 FIFOs are supplied - one per channel. The FIFOs are designed to support independent operation on each channel.
- MTBF: 1.49 million hours Bellcore SR332 MTBF
- Oscillator: Provision for a local oscillator to generate custom frequencies.
- Power Requirement: +5V
- Size: single slot Type 2 IP Module [max height on rear
- Software Interface: All registers are read-write. All registers on word addresses. Each channel has the same relative bit definitions. Each channel as separate control registers.
- Speed: 8 and 32 MHz IP bus operation. Up to 40 MHz on IO.
- Write cycle to RX FIFO: Write cycles to the RX FIFO are supported for loop-back testing.
Applications
- None Available
Aliases
- None Available
Related Items
IP-488-LOT
IP-488 to stock for 02-904-140-00-A.- IPOCTAL232
MODULE - IP-DAC
D/A CONVERTER 6 CHANNEL/12BIT HIGH QUALITY AUDIO - IP-ENCODER-6
INPUT MODULE 6 POINT ENCODER