VIPC618 - SBS TECHNOLOGIES VIPC618 Four Slot 6U VMEbus IndustryPack Carrier with...
- Part Number:
- VIPC618
- Model Number:
- VIPC618
- Make:
- SBS TECHNOLOGIES
- Lead Time:
- Available
- Qty In Stock:
- Available
SBS TECHNOLOGIES VIPC618 Four Slot 6U VMEbus IndustryPack Carrier with High Density Shielded I/O Connectors Simple Type: Base Board (Carrier Boards)
The VIPC618 VMEbus IndustryPack carrier is part of the IndustryPack family of modular I/O components. As a 6U carier board, the VIPC618 provides mechanical mounting and the electrical interface from the VME backplane to four single-wide IndustryPacks or up to two double-wide IndustryPacks. The carrier supports I/O, ID, memory, and interrupt functions. The VIPC618 is an enhanced version of the popular VIPC616. The VIPC618 uses shielded 50-pin subminiature D connectors as the front panel I/O interface. These shielded connectors offer significant reduction of EMI emissions and include latches that offer highly reliable cable connections, even in severe vibration environments. In addition to the front panel cabling, most of the I/O signals of the C and D IndustryPacks are also routed to the VMEbus P2 backplane connector. This permits more flexible cabling options in many chassis.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 100% software compatible with the VIPC616
- 64 lines of backpanel I/O via P2
- A24 and A32 memory maps available
- Activity LEDs for each IndustryPack slot
- Custom IRQ mapping available via PLD programming
- Filtered and fused power rails
- Four IndustryPacks slots on a 6U VME board
- Front panel I/O through high-density shielded connectors
- Power monitor LEDs
- Supports I/O, ID, memory, and interrupt cycles
- Up to 8 Mbytes of memory per slot
Specifications
- Back Panel I/O Access: All 50 I/O pins from slot D and a configurable selection of 14 pins
- Dimensions: 160 mm x 233.35 mm
- Form Factor: 6U VME
- Front Panel I/O Access: HD50: One AMPLIMITE 0.050 series rightangle receptacle headers without rails, with latch blocks, 50 position for each IndustryPack slot. AMP part number 749831-5.
- Fuses: +5 VDC @ 1A one per IndustryPack slot, +12 VDC @ 1A one total, -12 VDC @ 1A one total
- Humidity: 5 to 95% non-condensing
- I/O Space: A16 space, 128 bytes per IndustryPack slot
- ID Space: A16 space, 128 bytes per IndustryPack slot
- Indicators: One green LED per slot to show accesses, One green LED to show power to slots A and B, One green LED to show power to slots C and D
- IndustryPack Site Features: 8 MHz only. IO cycles, ID cycles, memory cycles, interrupt
- IndustryPack Specification: ANSI/VITA-4 1995
- Interrupts: IndustryPack interrupts mapped 1:1 to VME IRQ levels by shunt or PLD selections.
- Memory Space: A24 space: none or 128 Kbytes to 2 Mbytes per IndustryPack slot, A32 space: 8 Mbytes per IndustryPack slot fixed
- Number of IndustryPack Slots: Four, Up to two double-wide IndustryPacks may be fitted
- Operating temperature: 0 to 70°C
- Power Requirements: +5 VDC, 610 mA typical, +12 VDC, 0 mA typical, -12 VDC, 0 mA typical, Additional power is consumed by IndustryPack modules
- Storage: –40 to +85°C
- VME Conformance: Conforms to IEEE P-1024/D1.2
- Weight: 0.34 kg (0.81 lb)
Applications
- None Available
Aliases
- None Available
